New Holland Lawn Mower H8000 Series User Manual

New Holland H8000 Series  
Self-Propelled Windrower Specifications  
H8040 H8040 Prairie Special H8060 H8080  
MODEL  
ENGINE  
H8040  
H8060  
H8080  
H8040 PRAIRIE SPECIAL  
New Holland 4-cylinder  
274 cu. in. (4.5 L)  
New Holland 6-cylinder  
411 cu. in. (6.7 L)  
New Holland 6-cylinder  
411 cu. in. (6.7 L)  
..........................................................................................................................Turbocharged with air-to-air intercooler....................................................................................  
Rated horsepower (kW)*  
Fuel injection pump  
126 (94) @ 2,300 rpm  
Mechanical  
190 (142) @ 2,200 rpm  
Electronically controlled  
high pressure common rail  
2, 12-Volt 650 CCA / 150 amp  
226 (168) @ 2,200 rpm  
Electronically controlled  
high pressure common rail  
2, 12-Volt 650 CCA / 150 amp  
Batteries / alternator  
1, 12-Volt 925 CCA / 150 amp  
Fuel capacity, gal. (L) .......................................................................................................................120 (454) ...........................................................................................................  
Rotary radiator screen cleaner..........................................................................................................Standard............................................................................................................  
TRANSMISSION.....................................................................................................................Dual range hydrostatic.................................................................................................  
Final drive ...........................................................................................................................Double reduction planetary..............................................................................................  
Steering...........................................................................................................................................Hydrostatic..........................................................................................................  
Speed range, mph (kph)  
0-10.6 (0-17) working**  
0-15.8 (0-25.4) - road**  
0-12.5 (0 - 20) - working***  
0-18 (0 - 29) - road***  
0-12.5 (0 - 20) - working***  
0-18 (0 - 29) - road***  
LENGTH, with header  
283.1 (7192) with HS Series  
269.5 (6847) with 2355  
269.5 (6847) with 2358  
Less header and lift arms, in. (mm)............................................................................................205.2 (5213).........................................................................................................  
Height, in. (mm)  
134.1 (3415)**  
136.1 (3456)***  
136.1 (3456)***  
Wheelbase, in. (mm).......................................................................................................................138 (3494) ..........................................................................................................  
Front tread width, in (mm)  
127 (3225)**  
130.2 (3308)***  
130.2 (3308)***  
Rear tread width (adjustable), in. (mm)..........................................................................90-105-120 (2286-2667-3048) ..........................................................................................  
Rear axle suspension.........................................................................................................................Optional.............................................................................................................  
Tractor weight, lbs. (kg)  
10,745 (4874)**  
11,365 (5155)***  
11,365 (5155)***  
Rear axle tires..............................................................................................................................14L x 16.1 8PR.......................................................................................................  
Rear axle ground clearance  
35.7 (908)  
with 18.4 x 26 front tires  
35.7 (908)  
with 18.4 x 26 front tires  
38.8 (986)  
with 23.1 x 26 front tires  
Header drive......................................................................................................................................Hydraulic............................................................................................................  
Header flotation  
Hydraulic (in-cab adjustable)  
.......................Independent hydraulic flotation (flotation weight at each end  
of header independently controlled from cab)............................................  
HEADER TILT  
Hydraulic...........................................................................................................................................Standard............................................................................................................  
Header power reverser......................................................................................................................Standard............................................................................................................  
Adjustable windrow shields ..............................................................................................................Standard............................................................................................................  
In-cab windrow-width adjustment.....................................................................................................Optional.............................................................................................................  
Single lever header  
Transport lock system ....................................................................................................................Standard............................................................................................................  
CAB ....................................................................................................................................Deluxe, curved tinted glass..............................................................................................  
Cab suspension.................................................................................................................................Standard............................................................................................................  
Cab air filtration............................................................................................Dual: 1 external air filter and 1 in-cab recirculation filter.......................................................................  
Seat ...............................................................................................Deluxe air suspension seat with fore/aft lumbar adjuster, ride dampening ........................................................  
Instructor seat...................................................................................................................................Standard............................................................................................................  
*Manufacturer's rating per ECE R120 / ISO 14396 **with 18.4 x 26 tires ***with 23.1 x 26 tires  
HEADERS  
Sickle Hay Headers  
12HS* 14HS  
12 ft., 3 in. 14 ft., 3 in. 16 ft., 3 in. 18 ft., 3 in.  
Disc Hay Header  
Draper Headers  
16HS  
18HS  
720HD** 750HD  
770HD  
21HB** 25HB  
30HB  
30 ft.  
36HB  
36 ft.  
13 ft.  
15 ft., 5 in. 18 ft.  
21 ft.  
25 ft.  
H8040  
H8060  
H8080  
NA  
NA  
NA  
NA  
*12-foot header requires 16.9 x 28 drive tires **not compatable with 23.1 x 26 drive tires  
Page 1of 5  
 
New Holland  
®
Discbine Disc Header Specifications  
720HD 750HD 750HD Specialty 770HD  
MODEL  
720HD  
750HD  
750HD SPECIALTY  
H8060/H8080  
770HD  
H8080  
WINDROWER MODEL  
H8060/H8080  
H8060/H8080  
Header drive........................................................................................Hydrostatically driven header with dual hydraulic header drive motors........................................................  
Cutting width, ft. in. (m)  
Overall width, ft. in. (m)  
Weight, lbs. (kg)  
13' (3.96)  
13' 3" (4.04)  
3010 (1365)  
15' 4" (4.7)  
15' 6" (4.75)  
4680 (2123)  
15' 4" (4.7)  
15' 6" (4.75)  
3305 (1499)  
17' 11" (5.45)  
18' 1" (5.51)  
4890 (2218)  
MODULAR DISC CUTTERBAR  
Number of discs  
10  
12  
12  
14  
Maximum disc speed, rpm.....................................................................................................................3000............................................................................................................  
Number of reversible,  
swing-away knives  
20 (2 per disc)  
187 (301)  
24 (2 per disc)  
187 (301)  
24 (2 per disc)  
187 (301)  
28 (2 per disc)  
187 (301)  
Knife tip speed, mph (kph)  
Flotation ....................................................................................................................Hydraulic adjustment from windrower cab..............................................................................  
Cutting angle and height..............................................................Standard hydraulic control, from 2 to 12 degrees (minimum: 0.6 in. [15 mm]).................................................  
with standard skid shoes*  
Transport height—  
bottom of skid shoes, in. (mm)  
24.5 (622)  
29.6 (754)  
29.6 (754)  
29.6 (754)  
Hood liner.................................................................................................................High density, impact-resistant polyethylene.............................................................................  
CONDITIONER  
Type  
Chevron-design, intermeshing  
molded rubber rolls  
102 (2.6)  
Chevron-design, intermeshing  
molded rubber rolls  
102 (2.6)  
NA  
Chevron-design, intermeshing  
molded rubber rolls  
102 (2.6)  
Length, in. (m)  
Roll speed, rpm  
Roll pressure  
NA  
NA  
NA  
920  
923  
923  
Torsion-bar roll pressure system Torsion-bar roll pressure system  
Torsion-bar roll pressure system  
adjusts with a single crank,  
rolls separate automatically  
“on the go” to allow thick  
material to pass  
adjusts with a single crank,  
rolls separate automatically  
“on the go” to allow thick  
material to pass  
adjusts with a single crank,  
rolls separate automatically  
“on the go” to allow thick  
material to pass  
Roll gap  
Windrow/swath width, in. (mm)  
Adjustable stop-bolt  
38–96 (965–2438)  
Adjustable stop-bolt  
38–96 (965–2438)  
NA  
Adjustable stop-bolt  
38–96 (965–2438)  
60 (1524), 83 (2108)  
or 100 (2540)  
AUGER  
Type  
NA  
NA  
NA  
Floating  
20 (508)  
5 (127)  
Floating  
20 (508)  
Tapered, 7 (178) to 1 (25)  
Floating  
20 (508)  
7 (178)  
Maximum diameter, in. (mm)  
Flighting depth, in. (mm)  
*with 18.4 x 26 tires **with 23.1 x 26 tires  
OPTIONS (field-installed):  
• Crop dividers  
• High-contact chevron conditioning rolls  
• High stubble kit  
• Corner marker kit  
• Slatted-steel conditioning bundle  
• Gauge wheels  
• Push bar  
• Closure kit  
Page 3of 5  
 
New Holland  
HB Series Draper Header Specifications  
21HB 25HB 30HB 36HB  
MODEL  
VERSIONS AVAILABLE  
21HB  
25HB  
30HB  
36HB  
Single-knife drive, standard deck  
Single-knife drive, double swath  
Double-knife drive, standard deck  
Double-knife drive, double swath  
x
x
x
x
x
x
x
x
x
x
x
HEADER  
Cutting width, ft. (m)  
21 (6.4)  
3880 (1760)  
1.0 (25)*  
NA  
25 (7.6)  
4135 (1875)  
1.0 (25)*  
Optional  
30 (9.1)  
5021 (2278)  
1.0 (25)  
36 (11)  
5434 (2465)  
1.0 (25)*  
Standard  
Approximate weight (includes reel), lbs. (kg)  
Cutting height (minimum), in. (mm)  
Castering gauge wheels  
Standard deck center windrow  
width opening, in. (m)  
Double swath center windrow  
width opening, in. (m)  
Standard  
NA  
80 (2.03)  
80 (2.03)  
80 (2.03)  
50 (1.27)  
56 (1.42)  
56 (1.42)  
56 (1.42)  
Slow speed header transport kit..............................................................................................................Standard.....................................................................................................  
Transport height, in. (m) ................................................................................................40 (1.02) from tip of guards to ground)* ...........................................................................  
CUTTERBAR  
Cutting system............................................................................Choice of New Holland dual-knife system or Schumacher single-or dual-knife system........................................  
Knife drive...................................................................................................Schumacher hydraulically-driven, planetary-reduction sickle drive........................................................  
Sickles  
2
1 or 2  
1 or 2  
2
Sickle speed - strokes per minute...............................................................................................................1400 ........................................................................................................  
Sickle stroke, in. (mm) ............................................................................................................................3.31 (84).....................................................................................................  
Hay guards...............................................................................................................................................Standard.....................................................................................................  
REELS  
Type  
Steel  
..........Pick-up with steel or plastic fingers ..........  
20–48 rpm 20–48 rpm  
Plastic fingers  
20–48 rpm  
Speed range  
20–48 rpm  
Drive.........................................................................................................................Direct hydraulic drive w/ 45 cu. in. (.74 L) motor ....................................................................  
Hydraulic reel fore / aft adjustment  
Standard  
Optional  
Optional  
Standard  
DRAPER BELTS  
Belt width and construction................................42 in. (1.07 m) rubberized polyester belt with fiberglass reinforcement, tie bar end connection and molded V-Guide................  
Speed range, ft. (m)......................................................................................................................0 - 705 (215) / minute ..........................................................................................  
In cab canvas-speed control....................................................................................................................Standard.....................................................................................................  
Angle..................................................................................................................................................10 to 20 degrees...............................................................................................  
Double swath shift means.......................................................................................................................Hydraulic.....................................................................................................  
* with 18.4 x 26 drive tires  
OPTIONS (factory-installed)  
• Poly cutterbar skid plates  
• End-gauge wheels  
• Castering gauge wheels for 25HB  
• Cross auger kit  
Page 4of 5  
 
New Holland SP Windrower Dual Windrow  
Merger Attachment Specifications  
GENERAL INFORMATION  
Mechanical design  
Laterally-mounted, draper-belt conveyor; folds up under windrower belly frame when not in use, allowing single windrow or swath formation.  
Merger folds down and forward (further forward at the left end) when deployed for merging application.  
Movable deflector allows operator to control distance crop is thrown.  
Crop delivery direction  
Windrower compatibility  
Windrower software requirement  
Header compatibility  
Right side, behind right front tire  
Tier II, 6-cylinder models (non-draper) and all Tier III, 6-cylinder models (except with dealer-installed draper ready)  
7.1 or higher*  
15.5' and 18' disc headers with conditioning system  
Belt construction  
Single ply w/two ply edges; vulcanized endless construction w/vee-guide tracking rib on inner surface and lateral  
cleats on the outer surface to positively move material  
Belt tensioning  
Belt tracking  
Adjustable spring tension to minimized shock loading  
Eye bolt adjustment at front end of driver roll  
Merger conveyor flotation  
Table can float upward to minimize damage in the event of an obstruction or obstacle  
HYDRAULIC SYSTEM  
Raise/lower-deflector- belt drive  
Pump type  
Pump capacity @ rated speed, gpm  
Relief Pressure, psi (bar)  
Common system utilizing optional windrower-mounted auxiliary hydraulic system  
Windrower-mounted, fixed-displacement  
Tier II - 11.3 gpm (42.8 lpm); Tier III - 15.1 gpm (57.2 lpm)  
2000 (137.9)  
Belt drive type  
Fixed-displacement gear motor drive through #50 chain  
1.53 (25)  
7 - 13 (11.3 - 21)  
2.5 (63.5) diameter, double-acting w/mechanical transport lock  
1.5 (38.1) diameter, double-acting  
Motor displacement, cu. in. (cu. cm)  
Conveyor belt speed range, mph (kph)  
Raise/lower cylinder, in. (mm)  
Side deflector cylinder, in. (mm)  
SIDE DEFLECTOR  
Design  
Mounting frame  
Top-hinged, formed steel deflector w/plastic lower extension to protect the deflector from damage in the event of hitting an obstruction or high-centering  
Horizontal (manually) adjustable to accommodate two sizes of headers and operator preference on windrow shape and width  
OPERATOR CONTROLS  
Raise/lower  
Belt speed  
Propulsion handle-mounted button control- fully up or fully down  
Right-hand console mounted, two-action On/Off switch and variable speed toggle switch  
Propulsion handle-mounted rocker-switch, variable position control  
Side deflector  
DIMENSIONS  
Conveyor frame length, in. (mm)  
Conveyor frame width, in. (mm)  
Conveyor belt width, in. (mm)  
Conveyor belt length, in. (mm)  
Belt roller diameter, in. (mm)  
77.4 (1966.2)  
89 (2260.5)  
42 (1066.8)  
84.6 (2150) center to center of rolls  
4 (101.6)  
Ground clearance, operating, in. (mm)  
Ground clearance, transport, in. (mm)  
Adjustable; 5 (127) recommended (continuous ground contact is not intended)  
28 (711)  
WEIGHT (merger attachment only; does not include aux. hyd. kit)  
Shipping, lb. (kg)  
Operating, lb. (kg)  
1125 (510.3)  
976 (443)  
LUBRICATION  
Grease points  
Drive chain  
50 hr. lube interval at 3 zerks  
10 hr or daily interval; lube belt drive chain w/motor oil  
OTHER REQUIREMENTS  
Auxiliary hydraulic drive kit  
Select Tier II (dealer installed) or Tier III kit (factory- or dealer-installed option)  
* 7.1 is assumed to be the level that will be installed concurrent w/MY09 Job 1 at this time (3/08). MY08 units have 7.0 installed. Special software was provided for each of the pre-build units.  
Software on those units need not be replaced, unless other issues would necessitate it.  
Visit our Web site at www.newholland.com/na Or, call toll-free: 1-888-290-7377  
Design, materials and/or specifications are subject to  
change without notice and without liability therefor.  
Specifications are applicable to units sold in Canada, the  
United States, its territories and possessions, and may  
vary outside these areas.  
Safety begins with a thorough understanding of  
the equipment. Always make sure you and  
your operators read the Operator’s Manual  
before using the equipment. Pay close  
attention to all safety and operating  
decals and never operate machinery  
without all shields, protective devices  
and structures in place.  
© 2008 CNH America LLC  
New Holland is a registered trademark of CNH America LLC.  
Page 5of 5  
 

Miele Dishwasher G 5810 User Manual
MTD Lawn Mower 110 530 User Manual
NEC Flat Panel Television LCD6520L BK AV User Manual
NETGEAR Switch GS608v3 User Manual
Nikon Camera Lens MH 22 User Manual
Nortel Networks Printer Attendant Console User Manual
Onkyo Indoor Furnishings 29344872 User Manual
Oreck Vacuum Cleaner U2510RH User Manual
Panasonic Electric Shaver ES113 User Manual
ParaBody Home Gym 777101 User Manual